Reel system for solar swimming pool cover makes the job of covering and uncovering your pool much easier than maneuvering by hand. An important part of any swimming pool owners covers the use of solar equipment is of good quality. 

The main advantage of the solar cover, an increase in water temperature and preventing heat loss through evaporation expensive, far greater than the loss, expense and awkwardness of handling every day.

For this reason, because it makes sense to make the job of covering and uncovering as easy as possible. If you're looking for solar pool cover rollers, you can search for various online sources.

Image result for pool cover

Image Source: Google

There are basically two types of rolls pool systems, manual and electric-powered. We will look at both in turn. Both types of rolls comprise a set of telescopic tubes, which when assembled will be opened with the required width. 

This distance is usually the width of the pool, plus the overlap of about one foot each side. Instead of the telescopic tube is possible to buy a one-piece tube, for some systems, but the matter of transportation often makes this an expensive alternative.

Two of the most important characteristics of the tube are the diameter and thickness, or gauge, of the metal itself. 

The best way is to have the largest diameter and gauge that you can afford. While any tube will bend, the extent to which it does so depends on the load it carries and the diameter and gauge. 

If the tube has too many bends, it becomes difficult to change, create a cover and uncover the pool worked very hard.

The tube is then supported by a final stand. This final stand varies greatly from manufacturer to manufacturer but generally made of stainless steel. 

The proper design of these stands varies from supplier to supplier but generally produced with stainless steel longevity. Some plastic systems available, but although less expensive, they tend to be brittle and have a much lower age.